Image to Click HTML Code Free Mobile Repairing
banner
Image to Click HTML Code Free Mobile Repairing
banner
banner
banner

Sunday 12 November 2017

How to Solve iPhone 5S Vibrator Problems - iPhone 5S वाइब्रेटर सलूशन जम्पर पिक्चर के साथ

How to Solve iPhone 5S Vibrator Problems -  iPhone 5S वाइब्रेटर सलूशन जम्पर पिक्चर के साथ 


One of the rarest problems that you will encounter with your iPhone 5S is the vibrator problem. Normally vibrator problem occurs due to age and mode of usage of the phone, and it normally happens with older phones, but that doesn’t mean that this problem only occur with older phones, as newer phones are also prone of this issue, but this thing normally doesn’t happen.

Problems

  • Phone doesn’t vibrate at all.
  • Low Vibration in iPhone 5S
  • Sometimes it vibrates sometimes it doesn’t.

Reasons of Problems

  • Vibrator itself might be faulty.
  • Vibrator contacts might be rusty.
  • Ground terminal might be disconnected.
  • Vibrator’s button or vibrator strip might be faulty.
  • Capacitor or Vibrator IC might be faulty.

Workaround

  • The very first thing that you need to do is to check whether Vibrator is ON or OFF. Toggle between ON / OFF and check.
  • Restart your phone and check.

Tools Required

  • Multi Meter.
  • Jumper Wire.
  • Star Screw Driver.
  • Plastic Separation Tool
  • Heat Gun.

Hardware Solution

For Low Vibration



For Low vibration you need to change your vibrator, as there is no other solution than that. Low vibration problem occurs due to faulty vibrator and you need to change it in any case.
For No Vibration and Random Vibration
  • For No and random vibration the very first thing that you need to do is to check your vibrator with the help of a multi meter, if your vibrator is responding fine then you need  to move towards the next step.



  • Clean vibrator’s contacts and check, as sometimes vibrator fails to respond due to dust or rust over the vibrator’s contacts.
  • Now check the connection of ground terminal, if there is no ground terminal connection than you will not here any beep. Add a jumper wire in this system and connect it with any ground connection.
  • Afterwards check connection between Positive Terminal and Capacitor.
  • Check vibrator strip if it is faulty then replace it, as it cannot be repaired.


  • Now check the function of your phone’s vibrator button, if the response of the button is not normal then change it. (Normal response is when you toggle vibrator’s button ON / OFF, you see the response on your phone’s screen, in case you don’t see any response on your phone’s screen then change vibrator’s button).

  • If all of the above methods fail then you need to gently heat vibrator’s IC, if it still doesn’t work then replace it.

No comments:

Post a Comment